Email: [email protected] | Telefoonnummer: +31(0)20-3450010
Bediening van je PM5
De instructies in dit hoofdstuk zijn van toepassing op de laatste versie van de firmware. Is je firmware niet up-to-date? Dan kunnen de menuopties afwijken. We raden je aan de meest recente firmware te gebruiken.
Note: Any instruction that references a USB Flash Drive applies only to those PM5s that feature a USB-A port (sometimes simply referred to as a "USB port"). For more information, see Which Ports Does My PM5 Have?
Basisfuncties
The Performance Monitor turns on automatically when you do any of the following:
- Pull the handle(s) on the RowErg or SkiErg, or start pedaling on the BikeErg
- Push a button on the PM
- Connect the PM to a computer
- Insert batteries
The PM turns off automatically after a couple of minutes of inactivity. A spinning flywheel is considered activity, so the count starts once the flywheel stops.
Gebruik je de Performance Monitor voor het eerst? Of gebruik je ‘m in een sportschool? Neem dan even de tijd om de datum en tijd correct in te stellen. Dan wordt je data opgeslagen met de juiste datum en tijd. Opgeslagen data kun je namelijk niet meer aanpassen.
- Kies More Options in het hoofdmenu.
- Kies Utilities.
- Kies Date and Time.
- Stel de juiste datum en tijd in:
- Gebruik plus of minus om de juiste waarden in te stellen.
- Navigeer met pijl naar rechts en pijl naar links door de datum en tijd.
- Sla je instellingen op met het vinkicoon.
- Ga naar het hoofdmenu. Begrijp je de huidige taal niet? Druk dan op Menu|Back tot dat het scherm niet meer verandert. Dit betekent dat je in het hoofdmenu bent aangekomen.
- Kies nu More Options, de vijfde grijze knop rechts op de monitor.
- Kies Utilities, de tweede grijze knop rechts op de monitor, en daarna Language (dezelfde knop nog eens). Nu zie je de taalkeuzes.
- Kies de juiste taal met behulp van de knoppen rechts op de monitor.
- Ga vanuit het hoofdmenu naar More Options.
- Kies Utilities.
- Kies More Utilities.
- Kies LCD Contrast.
- Stel het contrast in met Lighter en Darker.
- Druk op Menu op Menu | Back als je tevreden bent.
Met de Change Display knop kun je een 5 tal verschillende weergaves kiezen. Als je aan het roeien/skiën bent druk op de Display of Change Display knop om de verschillende weergaves te zien. Je kan ook de knoppen rechts op de PM gebruiken om op de verschillende weergaves te komen:
- 1ste knop – Alle gegevens
- 2de knop – Kracht Curve
- 3de knop – Sparringpartner
- 4e knop – Staafdiagram
- 5e knop – Grote Weergave
Op elke weergave krijg je je hartslag te zien, als je met de juiste hartslagmeting aan het trainen bent.
Alle Gegevens
Alle Gegevens geeft de meeste informatie van je training. Afhankelijk van wat voor training je aan het doen bent (Tijd, Afstand, of Interval) kan je volgende informatie zien:
- Tijd/geroeide afstand/afstand nog te roeien
- Halen per minuut or revolutions per minute (PM5/BikeErg only)
- Trainingsintensiteit, snelheid per 500 meter, Calorieën of wattage (kijk bij Gebruik van de Units voor meer informatie)
- Gemiddelde trainingsintensiteit (in snelheid per 500 meter, Calorieën of wattage) of totale tijd/meters
- Split tijd, meters, snelheid, Calorieën of wattage (kijk bij Gebruik Splits voor meer informatie)
- Verwachte eindtijd:
- Tijdtraining, het aantal verwachte meters dat je hebt geroeid bij het einde van je training
- Afstandstraining, de verwachte tijd wat je nog moet roeien tot het einde van je training; bij Quickstart/Ski trainingen is de verwachte finish 30 minuten.
- Interval trainingen, verwachte finish in afstand of tijd voor deze interval.
Kracht Curve
De Kracht Curve is een grafiek van de beweging die je elke haal maakt. Als je de Kracht Curve op de display bekijkt, laat de PM je trainingsdata op het bovenste deel van je scherm zien en de Kracht Curve van elke haal op het onderste deel van de display.
Voor meer informatie kijk op Werken met de Kracht Curve.
Sparringpartner
De Sparringpartner display maakt het mogelijk dat je roeit/skiet tegen een voor ingestelde snelheid, geïllustreerd door een boot of een skiër. Als je de Sparringpartner display bekijkt, laat de PM je trainingsdata op het bovenste deel van je scherm zien en de Sparringpartner opzet op het onderste deel van de display.
Je kan je pace boot/skiër instellen bij het instellen van een nieuwe training. Of je kan een training herhalen (ReRow/ReSki functie). De pace boot/skiër is je eerder gedane training. Als je geen pace boot/skiër instelt dan gaat de pace boot/skiër net zo hard als jij traint.
Voor meer informatie kijk op Sparringpartner.
Staafdiagram
De staafdiagram laat je kracht zien in Watt door een staaf met de kracht in een staaf. (Gebruik je hartslagmeting, dan krijg je in de staafdiagram je hartslag intensiteit te zien, elke 10 seconde komt er een nieuwe staaf te staan). Hoe hoger de staaf hoe hoger het vermogen is wat je hebt geleverd of hoe hoger je hartslag is.
Als je de Staafdiagram display bekijkt, laat de PM je trainingsdata op het bovenste deel van je scherm zien en de Staafdiagram op het onderste deel van de display.
Grote Weergave
De Grote weergave geeft de trainingsgegevens in een grote weergave weer, je kan de informatie beter zien.
Tijdens je workout of het bekijken van je resultaten verander je de weergegeven eenheid van snelheid naar Calorieën of Watt door op Units of Change Units te drukken. Voor de achterliggende berekening, klik op Wattage Calculator.
Drag factor is a measure of fan load. The Performance Monitor self-calibrates on the RowErg and SkiErg by recalculating the drag factor on every pull, and the BikeErg needs to be calibrated from time to time. On all our ergs, you get a true measure of your effort regardless of the damper setting or changing conditions. You can adjust the drag factor by moving the damper lever on the flywheel. (Learn more about damper setting and drag factor)
To view drag factor on the PM:
- On the Main Menu, select More Options.
- Select Display Drag Factor.
- Begin rowing, skiing or riding. The PM will display the drag factor after a few seconds.
A brand new RowErg will have a drag factor of 90 or less at a damper setting of 1 and 200 or more at a damper setting of 10.
A brand new SkiErg will have a drag factor of 55 or less at a damper setting of 1 and 150 or more at a damper setting of 10.
A brand new BikeErg will have a drag factor of 45 or less at a damper setting of 1 and 225 or more at a damper setting of 10.
These drag factor ranges for new ergs assumes that the machines are at sea level. Elevation has a large impact on air density and therefore drag factor. The monitor will accurately detect environmental changes and adjust the drag factor to assure accurate data.
De Performance Monitor toont je trainingsresultaten op twee manieren: als totale eindafstand of –tijd of als een serie tussentijdse metingen of splits. Deze splits tonen hoe je snelheid tijdens de training varieerde.
Over het algemeen wordt een training door de monitor in vijf delen gesplitst. Eén tussentijdse meting is dan dus een vijfde van de training. Hier zijn een paar uitzonderingen op. Zo wordt bij een training van 2000 meter na elke 500 meter een tussentijdse meting gedaan en bij een marathon (42,195 km) na elke 2000 meter. Stel je zelf een training in? Dan is het ook mogelijk om zelf in te stellen wanneer er gemeten wordt.
Tussentijds meten werkt alleen met afstands- of duurtrainingen, niet bij intervaltrainingen.
Splits en Afgebroken training
Breek je een afstandstraining voortijdig af? Dan slaat de monitor deze training op als een “Vrij roeien/skiën”-training, dus alsof je vooraf geen training hebt ingesteld.
“Vrij roeien/skiën”-trainingen worden opgeslagen met tussentijdse metingen om de vijf minuten, met een maximum van zeven om ruimte te besparen. Zodra je langer dan 35 minuten roeit en dus meer dan zeven splits nodig hebt, worden enkel nog splits om de tien minuten opgeslagen. Na 70 minuten worden de splits nog om de twintig minuten opgeslagen. Dit proces gaat blijft doorgaan om het totale aantal splits op zeven te houden.
De Performance Monitors zijn geprogrammeerd om na vier minuten vanzelf uit te gaan. (twee minuten als de PM niet in een trainingsscherm staat). Om ervoor te zorgen dat je monitor niet uit gaat als je een langere pauze neemt, druk je af en toe op Display of Change Display, Units of Change Units, zodat de monitor actief blijft.
Druk niet op Menu of Menu | Back omdat dan je workout beëindigt wordt.
Just Row workouts longer than one minute or longer than 100 meters and preset workouts are saved to the PM automatically. After your last stroke of a Just Row workout, press Menu twice and the meters rowed will be saved to memory. This can also be achieved by waiting 6 seconds after your last stroke and pressing Menu once.
The PM5 stores over 1000 workouts in memory. If you are using a USB flash drive with your PM, your workouts will be saved to those devices instead.
- Kies in het hoofdmenu More Options.
- Kies Utilities.
- Kies More Utilties
- Kies Product ID.
- Druk op More Information.
De kilometertellers worden onderin het scherm getoond. Deze teller kun je terugzetten op nul. De kilometertellers op de PM3, PM4 en PM5 kunnen worden gereset met een harde reset (zie hieronder). Afhankelijk van de leeftijd van je apparaat (PM3 of PM4 firmware versie <300) kan deze reset ook uitgevoerd worden door het verwijderen van de batterijen voor een paar minuten. De kilometerteller kan een indicatie geven van de intensiteit van het gebruik of de slijtage van een roeimachine, maar kan ook misleidend zijn als de monitor een keer is gereset of vervangen.
Harde Reset
Methode 1
Druk de knoppen UNITS en DISPLAY tegelijk in en druk dan met een paperclip de resetknop achterin het apparaat in. Hou de knoppen minstens 7 seconden ingedrukt totdat op het display “Setting Factory Defaults” verschijnt. Laat vervolgens de knoppen los.
Methode 2
Verwijder de batterijen en de USB-kabel. Druk de knoppen UNITS en DISPLAY tegelijk in. Plaats de batterijen. Hou de knoppen minstens 7 seconden ingedrukt totdat op het display “Setting Factory Defaults” verschijnt. Laat vervolgens de knoppen los.
PM5s either store workouts to Memory, or to a USB flash drive if that device is in use. Stored workout information is displayed as a final result for the total distance or time and as a set of points (or segments) along the way called "splits."
Take the following steps to view workouts in PM Memory.
- On the Main Menu, select Memory.
- Choose how you want to see the workouts listed: List by Date or List by Type. If List by Type, then choose a specific type and select List Workouts.
- Use the up and down arrows to navigate to the workout you want to view, and select the magnifying glass icon (fourth button on the right).
Firmware is the computer program that is embedded in and runs the Performance Monitor, and we recommend keeping your PM up to date with the most current firmware available for your monitor. Updating firmware requires either a smartphone with the ErgData app, or a computer, our free Concept2 Utility and a USB cable. Learn more
PM5 gebruik twee monocel-batterijen.
De Batterijen Controleren
- Kies in het hoofdmenu More Options.
- Kies Utilities.
- Kies Battery.
- Gebruik je monocel-batterijen? Dan wordt het niveau van de batterij weergegeven als percentage.
- Gebruik je de oplaadbare accu? Dan wordt het niveau weergegeven als “Low”, “Very Low” enzovoort.
De PM geeft drie mogelijkheden van het laten zien van de intensiteit van je training:
- Tijd over 500 meter —Hoe lang doe je over 500 meter roeien of skiën: hoe kleiner het getal hoe sneller je gaat. De monitor laat elke haal die je maakt zien wat je tijd is per 500 meter. Het laat ook je gemiddelde tijd per 500 meter zien voor de training die je aan het doen bent.
- Wattage —Dit het vermogen dat je levert in Watt. Hoe hoger het getal des te meer vermogen lever je. De monitor laat het aantal Watt per haal zien. Het laat ook je gemiddelde Watt zien voor de training die je aan het doen bent. Voor informatie over de formule die gebruikt is om het Wattage te bepalen of om de Snelheid-naar-Wattage-Calculator of Wattage-naar-Snelheid-Calculator ga naar de Wattage Calculator pagina
- Calorieën—Het aantal Calorieën wat je hebt verbrand : hoe hoger het getal, des te meer Calorieën heb je verbrand. Tijdens de training laat de display het totaal aantal Calorieën wat je hebt verbrand en laat het ook zien hoeveel je op uur-basis zou verbranden. Om Calorieën te calculeren gebruikt de monitor de formule gebaseerd op een individu van 79,4 kg. Om het aantal Calorieën wat je hebt verbrand voor jouw gewicht, ga naar de Calorie Calculator pagina.
Je kan tijdens je training, tijdens het instellen van de training of het bekijken van je resultaten, elk moment op Units of Change Units drukken om een nieuwe weergave te zien. De Display laat Meters, Snelheid, Wattage en Calorie verbruik zien door op de Change Units knop te drukken.
Stroke rate is the number of strokes you take per minute, or spm (Strokes Per Minute). The PM displays this number in the upper right corner on every workout display. On a BikeErg, this cadence will be displayed as rpm (revolutions per minute).
For rowing, a stroke rate between 24 and 30 strokes per minute is typical for most workouts. When racing, stroke rates are generally a bit higher but usually still below 36.
For skiing, the stroke rate will generally be between 30 and 40.
For biking, for most workouts, the revolutions per minute will generally be between 60 and 100.
An important notion to understand is that on the RowErg and SkiErg, an increased stroke rate does not necessarily mean that you are working out with more intensity. Instead, the key to increasing intensity is knowing how and when to apply power. Focus on getting as much power as you can into each drive/pull. To focus on this power:
- For rowing, think of using a ratio of one beat on each drive for every two beats on the recovery. In other words, don’t rush as you travel up the slide to take the next stroke. Instead, relax on the recovery as you prepare for the work of the next drive. See How to Row Harder for more information.
- For skiing, the drive and recovery are generally much closer in length.
The BikeErg offers you two ways of managing the resistance you feel and the resulting intensity of your workout: the damper setting and your pedaling cadence. An increase in either one will raise the resistance that you feel, and if you increase both, the resistance will go up even more quickly.
As you do this, watch the PM for immediate feedback on your intensity. As your intensity increases, your pace per 500/1000 meters will decrease, and your watts and calories will increase. For more information on monitoring intensity, see Understanding and Changing Units.
- Power up the PM and access the Main Menu.
- From the Main Menu, select More Options > Utilities > More Utilities > Product ID.
The version number will be listed as "PM Firmware Version" at the top of the Product ID window.
- Power up the PM and access the Main Menu.
- From the Main Menu select More Options > Utilities > More Utilities > Product ID.
The hardware version number will be listed as "PM Hardware Version" near the top of the Product ID window.
Geavanceerde functies
The PM5 supports ANT+ and Bluetooth Smart for wireless heart rate monitoring. To use this feature, you will need a chest belt that supports one of these transmission technologies.
For more information, visit:
When using a compatible heart rate chest belt, the PM5 stores heart rate data as follows:
- Splits: The PM stores the last good heart rate at the end of a split.
- Interval work period: The PM stores the last good heart rate at the end of the interval.
- Rest when doing a variable interval workout: The PM stores the ending heart rate.
- Rest when doing a time or distance interval workout: The ending heart rate is not stored.
There are two ways to set up the PaceBoat/PaceSkier feature. You can enter a value for the Optional PaceBoat/PaceSkier Setting whenever you are setting up a workout with the New Workout function or you can use the ReRow/ReSki function to use a split-by-split replay of a prior workout.
Note: In general, a split is 1/5 of a workout. There are a few exceptions to this; for example, splits for 2000m workouts are set at 500m, and splits for a marathon (42,195m) are set at 2000m. See Understanding Splits for more information.
Optional PaceBoat/PaceSkier Setting
This setting gives you a consistent PaceBoat/PaceSkier. You can define the Optional PaceBoat/PaceSkier Setting anytime you are setting up a workout with the New Workout function (Select Workout > New Workout). During your workout, the PaceBoat/PaceSkier setting is displayed at the bottom of the PM screen.
Using the ReRow/ReSki Function
Choose the ReRow/ReSki option when you want to re-do a past workout. To do this, you will need to have some workouts in the PM Memory. PM5s with a USB-A port can also re-do a past workout that is stored on a USB flash drive (see Which Ports Does My PM5 Have?).
Rowing or Skiing Against Another Person’s Workouts
There are three methods to row or ski against another person’s workouts:
- Have the other person exercise without a USB flash drive so that their workout will be stored in PM Memory. Then use the ReRow/ReSki option to select that workout and row/ski against it.
- For PM5s with a USB-A port: Have the other person ("Person A") row or ski with a USB flash drive so their results are saved to the USB flash drive. Use USB flash drive > List by Type to find their workout. Select ReRow/ReSki, and then remove the USB flash drive from the monitor. Person B now rows/skis, and has Person A's PaceBoat/PaceSkier driven by Person A's results. Person B's results will be stored to PM Memory. After the workout is complete, insert Person B's USB flash drive and transfer the workout from PM Memory. Person B's results are now on Person B's USB flash drive. (See Which Ports Does My PM5 Have?.)
- Using ErgData, you can share a workout to another user, which can then be rerowed if the other person also uses ErgData.
Verification codes are used primarily for Concept2 world and national records. They are not needed or required to participate in the Concept2 Online Logbook, Rankings, or challenges.
The PM3, PM4 and PM5 monitors generate a verification code for each piece. This is a 16-digit code that is based on workout date, distance and duration. If you are entering a piece for the Online Rankings, you may want to edit your online logbook entry using the pencil icon and enter this code. Doing so will mark your piece as verified in the Ranking. Note: there is no need to enter a verification code if you are uploading your results using the Concept2 Utility or ErgData app, as these pieces are considered verified automatically.
To get the verification code for a piece:
- Ensure your PM is running the latest firmware.
- Ensure the date and time on your PM is accurate.
- Take care when setting up your workout, and complete your piece.
- After you have completed your piece, select (View Detail) for the piece.
- Go to Main Menu > More Options > Memory and select the magnifying glass icon for the workout you want to view.
- If you are using a USB flash drive, go to USB Logbook > List By Date and select the magnifying glass icon for the workout you want to view.
- On the View Detail screen, for PM5s running the latest firmware the fourth gray button on the right has a V symbol in a circle. Press this button once. On PM5s running older firmware, the fourth gray button on the right has no action associated with it. Press this button twice. The 16-digit verification code will be displayed in the upper right hand corner of the monitor.
If you have any questions or difficulties, please email [email protected].
De Krachtcurve is een grafiek van je krachtsinspanning tijdens een haal. Hij toont hoe je totale krachtsinspanning varieert terwijl je achtereenvolgens je benen, rug en armen gebruikt tijdens de haal. Hoe gelijkmatiger de curve is, hoe gelijkmatiger je je krachten verdeelt. Hoe groter het oppervlak onder de curve is, hoe beter het resultaat van de haal zal zijn. Het is het beste om te streven naar een brede boog zonder scherpe punten of haperingen. Dit toont dat je een soepele, vloeiende haal maakt. Heb je een coach? Vraag hem of haar dan zijn of haar mening over hoe je curve eruit zou moeten zien.
Je Krachtcurve Bekijken
Om je krachtcurve te bekijken kun je op elk gewenst moment op Display of Change Display drukken totdat je de krachtcurve onderin het scherm ziet verschijnen. Je kunt ook op de tweede knop rechts op de monitor drukken.
Je Krachtcurve Veranderen
Verander de vorm van je Krachtcurve door je timing en nadruk op je benen, rug en armen te variëren tijdens de Kracht Fase tijdens de haal. Om meer te weten ga je naar Gebruik van de Krachtcurve: Training Section.
Workouts instellen
De PM maakt het mogelijk verschillende type trainingen te programmeren.. of geen een als daar je interesse naar uitgaat. Lees verder voor de basis.
Quickstart
Ben je niet het op-knoppen-drukken-type, dan ga beginnen je je training op de Indoor Rower of SkiErg door te trekken aan de hendel(s). De monitor gaat vanzelf aan en laat je gegevens na een paar seconde op het scherm zien. Dit type training heeft geen duur en kennen we als Quickstart. Wanneer je de Quickstart gebruikt dan telt de monitor op beginnend bij nul.
Een Quickstart training kan wel to 50.000 meter gaan en je moet minimaal 1 minuut roeien/skiën om je gegevens op je LogKaart op te slaan. Meer informatie via Quickstart.
Afstand - Enkel
Hierbij programmeer je de monitor voor een bepaalde afstand (500 meter, 5000 meter, 10000 meter, etc.) met de intentie deze afstand te roeien/skiën. Als je deze enkele afstand instelt, dan loopt de monitor af van het aantal meter dat je hebt ingesteld tot het eind en laat de tijd zien (in tiende van seconden) bij de finish.
Tijd - Enkel
Hierbij programmeer je de monitor voor een bepaalde tijd (30 minuten, een uur, etc.) met de intentie deze tijd te roeien/skiën. Bij deze training telt de monitor af vanaf de tijd dat je geprogrammeerd hebt en laat het totaal aantal meters zien bij de finish.
Calorie - Enkel
Note: This option is available on PM5s only.
A Single Calorie workout is when you program the monitor for a certain number of calories (20, 50, 70, etc.) with the intention of working out until you have burned the number of calories entered. When doing a single calorie piece, the monitor counts down from the number of calories programmed and displays your time to the tenth of the second at the finish. To view how many meters you completed during that time, view the result in memory.
To understand how the Performance Monitor calculates calories, visit the Calorie Calculator page.
Intervallen
Interval trainingen zijn trainingen waarin perioden (intervallen) van arbeid gevolgd worden met perioden van rust, waarbij je geheel stopt met roeien of het vliegwiel heel rustig draaiend houd. Interval trainingen kunnen ingesteld worden op tijd, op afstand of variabel:
- gebaseerd op Tijd – Tijdens elke interval, je arbeid gedurende een bepaalde tijd en je rust periode is ook een bepaalde tijd voordat de volgende periode van roeien weer begint. (kijk bij Instellen Interval op Tijd)
- gebaseerd op Afstand – Tijdens elke interval, roei/ski je een bepaalde afstand en je rust periode is een bepaalde tijd alvorens je interval weer begint. (kijk bij Instellen Interval op Afstand)
- Calorie based—During each interval, you work until you burn a predetermined number of calories and then rest for an amount of time before beginning the next work interval.
- Variabel – De training bevat een combinatie van tijd en of afstand intervallen, welke gevolgd worden door een rust periode. (kijk bij Instellen Interval Variabel)
Rust Periode – van te voren ingesteld of niet
Wanneer je een rust periode instelt kan je van te voren een specifieke tijd instellen of je kan dat niet instellen, hierdoor is de rust periode zo lang/kort als je zelf wil. Het niet instellen werkt vooral bij trainingen als CrossFit welke het Indoor roeien/skiën combineren met andere activiteiten niet op de Indoor Rower/SkiErg (kettle bell swings, box jumps, etc). Kijk voor meer informatie bij Instellen Training zonder vooraf opgegeven rust periode..
Voorgeprogrammeerde Trainingen
Voorgeprogrammeerde Trainingen (Standaard Training) zitten al in de Performance Monitor verwerkt. De PM heeft vijf standaard trainingen en vijf favoriete Trainingen. Kijk voor meer informatie:
Special
Special Workouts include Biathlon and Ergathlon. Biathlon alternates erg work with another test. Traditionally the sport of Biathlon includes target shooting, but any other challenge of accuracy can be used. Ergathlon is an event using all three Concept2 ergs. The PM5 offers a selection of Ergathlon distances to choose from.
De automatische modus wordt ingeschakeld als je begint te trainen zonder vooraf een tijd of afstand in te stellen. Bij zo’n “vrij roeien/skiën”-workout begint de Performance Monitor na enkele seconden je workoutdata te registreren.
Je kunt ook als volgt een “vrij roeien/skiën”-workout beginnen:
- Kies vanuit het hoofdmenu Just Row (of Just Ski).
Note: You must row or ski for at least one minute or at least 100 meters for Just Row/Just Ski results to be saved in memory or on your LogCard or USB flash drive. After your last stroke of a Just Row workout, press Menu or Menu | Back twice and the meters rowed will be saved to memory. This can also be achieved by waiting 6 seconds after your last stroke and pressing Menu or Menu | Back once.
Een Vrij roeien/skiën-workout kan maximaal 50.000 meter lang zijn.
De monitor heeft vijf voorgeprogrammeerde workoutsen vijf gebruikersworkouts.
Zo kies je een workout uit de standaardlijst:
- Kies vanuit het hoofdmenu Select Workout.
- Kies Standard List.
- Kies uit één van de vijf standaard workouts:
- 2000m—een vaste afstand van 2000 meter.
- 5000m—een vaste afstand van 5000 meters.
- 10000m—een vaste afstand van 10000 meters.
- 30:00—een vaste duur van 30 minuten.
- 500m/1:00r—Een intervaltraining bestaande uit 500 meter inspanning gevolgd door een minuut rust, herhaald totdat je stopt met roeien/skiën (het laatst afgeronde interval is het laatste dat meegeteld wordt).
Zo kies je een workout uit de gebruikerslijst:
- Kies in het Hoofdmenu Select Workout.
- Kies Custom List.
- Kies één van de vijf gebruikersworkouts:
- :30/:30r—Een intervaltraining van 30 seconden inspanning gevolgd door 30 seconden rust, herhaald totdat je stopt met roeien/skiën (het laatst afgeronde interval is het laatste dat meegeteld wordt).
- v1:00/1:00r...7—Een variabele intervalworkout bestaande uit zeven intervallen (selecteer de workout om de intervaldetails te zien).
- v2000m/3:00r...—Een variabele intervalworkout bestaande uit zeven intervallen (selecteer de workout om de intervaldetails te zien).
- v1:40/:20r...9—Een variabele intervalworkout bestaande uit zeven intervallen (selecteer de workout om de intervaldetails te zien).
- 42,195—Een vaste afstand van 42.195 meter, de afstand van de marathon.
- Kies in het Hoofdmenu Select Workout.
- Kies New Workout.
- Kies Single Time.
- Stel in dit venster de tijd, tussentijd en PaceBoat/Paceskier op de gewenste waarde in:
- Gebruik plus en min om de waarden te verhogen/verlagen.
- Navigeer met pijl naar rechts en pijl naar links naar de gewenste waarde.
- Kies het vinkicoon om de workout op te slaan.
- Gebruik je een LogCard of USB stick? Dan zal de PM je vragen of je de workout als favoriet op wilt slaan. Dit is handig als je deze workout regelmatig doet. Kies Yes om de workout op te slaan. Kies dan de workout die je met de huidige workout wilt vervangen.
- Wil je de workout niet als favoriet opslaan? Kies dan No.
- Kies in het hoofdmenu Select Workout.
- Kies New Workout.
- Kies Single Distance.
- Stel in dit venster de afstand, deelafstand en PaceBoat/Paceskier op de gewenste waarde in:
- Gebruik plus en min om de waarden te verhogen/verlagen.
- Navigeer met pijl naar rechts en pijl naar links naar het gewenste cijfer.
- Kies het vinkicoon om de workout op te slaan.
- Gebruik je een LogCard of USB stick? Dan vraagt de PM je of je de workout als favoriet wilt opslaan. Dit is handig als je deze workout regelmatig doet. Kies Yes om de workout op te slaan. Kies dan de workout die je met de huidige workout wilt vervangen.
- Wil je de workout niet als favoriet opslaan? Kies dan No.
- On the Main Menu, choose Select Workout.
- Select New Workout.
- Select Single Calorie.
- On the Set Calories window, set the number of calories you want to burn, the split length, and the PaceBoat/PaceSkier, as desired:
- Choose plus or minus to increase/decrease the values as needed.
- Choose the right and left arrows to navigate through the various digits.
- Select the checkmark icon to save the workout.
For information on the formula used to calculate calories, visit the Calorie Calculator page.
- Kies in het hoofdmenu Select Workout.
- Kies New Workout.
- Kies Intervals: Time.
- Stel in dit venster de waarden voor kracht- en rustintervallen en PaceBoat/Paceskier op de gewenste waarde in:
- Gebruik plus en min om de waarden te verhogen/verlagen.
- Navigeer met pijl naar rechts en pijl naar links naar het gewenste cijfer.
- Kies het vinkicoon om de workout op te slaan.
- Gebruik je een LogCard of USB stick? Dan vraagt de PM je of je de workout als favoriet wilt opslaan. Dit is handig als je deze workout regelmatig doet. Kies Yes om de workout op te slaan. Kies dan de workout die je met de huidige workout wilt vervangen.
- Wil je de workout niet als favoriet opslaan? Kies dan No.
- Kies in het hoofdmenu Select Workout.
- Kies New Workout.
- Kies Intervals: Distance.
- Stel in dit venster de waarden voor kracht- en rustintervallen en PaceBoat/Paceskier op de gewenste waarde in:
- Gebruik plus en min om de waarden te verhogen/verlagen.
- Navigeer met pijl naar rechts en pijl naar links naar de gewenste waarde.
- Kies het vinkicoon om de workout op te slaan.
- Gebruik je een LogCard of USB stick? Dan vraagt de PM je of je de workout als favoriet wilt opslaan. Dit is handig als je deze workout regelmatig doet. Kies Yes om de workout op te slaan. Kies dan de workout die je met de huidige workout wilt vervangen.
- Wil je de workout niet als favoriet opslaan? Kies dan No.
- On the Main Menu, choose Select Workout.
- Select New Workout.
- Select Intervals.
- Select Intervals: Calorie.
- On the Intervals: Calorie window, set the number of calories you want to burn during the work interval, the rest interval time and the PaceBoat/PaceSkier, as desired:
- Choose plus or minus to increase/decrease the values as needed.
- Choose the right and left arrows to navigate through the various digits.
- Select the checkmark icon to save the workout.
- The PM5 allows a maximum of 50 intervals in a single workout.
For information on the formula used to calculate calories, visit the Calorie Calculator page.
- Kies in het hoofdmenu Select Workout.
- Kies New Workout.
- Kies Intervals: Variable.
- Kies in het scherm voor het eerste interval Distance of Time voor het type interval dat je wilt instellen.
- Stel de afstand/tijd voor het krachtinterval, de tijd voor het rustinterval en de Paceboat/Paceskier in:
- Gebruik plus en min om de waarden te verhogen/verlagen.
- Navigeer met pijl naar rechts en pijl naar links naar de gewenste waarde.
- Kies het vinkicoon om de workout op te slaan.
- Herhaal stappen 4-6 voor alle intervallen die je wilt instellen.
- Ben je hiermee klaar? Kies dan No More Intervals.
- Gebruik je een LogCard of USB stick? Dan vraagt de PM je of je de workout als favoriet wilt opslaan. Dit is handig als je deze workout regelmatig doet. Kies Yes om de workout op te slaan. Kies dan de workout die je met de huidige workout wilt vervangen.
- Wil je de workout niet als favoriet opslaan? Kies dan No.
De Ongedefinieerde Rustinterval Functie geeft je de optie om een intervaltraining in te stellen waarbij het rustinterval niet is gedefinieerd. Dit is nuttig bij trainingen zoals CrossFit waarbij het roeien of skiën gecombineerd worden met andere activiteiten. Doe je een workout die bestaat uit het zo vaak mogelijk roeien van 500 meter, telkens gevolgd door 5 box jumps? Dan kun je het ongedefinieerde rustinterval gebruiken om de box jumps te doen.
- Kies in het hoofdmenu Select Workout.
- Kies New Workout.
- Kies Intervals: Distance. Op het scherm verschijnt de defaultafstand 500 meter en de defaultinterval 1:00 minuut.
- Druk op pijl naar rechts totdat op het scherm “Set Rest Time” knippert.
- Druk op de plus knop. Nu verschijnt op het scherm “Undefined Rest Time”.
- Druk op het vinkicoon en begin met roeien/skiën.
Ga door met roeien totdat de monitor je vraagt te stoppen. Dit is het begin van het eerste ongedefinieerde rustinterval waarin je de box jumps kunt doen. Ben je klaar om het volgende interval te doen? Druk dan op Continue en begin weer met roeien/skiën. Heb je alle intervals voltooid? Druk dan op Menu of Menu | Back totdat je weer in het Hoofdmenu bent.
Let op:
- Ongedefinieerde rustintervallen kunnen maximaal 10 minuten duren.
- Je kunt maximaal 29 ongedefinieerde rustintervallen instellen.
- Het is niet mogelijk om trainingen met ongedefinieerde rustintervallen op te slaan als favorieten of custom workouts.
- Gebruik je de functie ReRow/ReSki en doe je een workout met ongedefinieerde rustintervallen over? Dan worden de rustintervallen gedefinieerd aan de hand van de tijd die je de eerste keer gebruikte voor de rust, afgerond naar het dichtstbijzijnde veelvoud van vijf seconden.
- Je kunt ook gebruik maken van ongedefinieerde rustintervallen bij duurtrainingen en trainingen met variabele intervallen.
Resultaten Bekijken van Trainingen met Ongedefinieerde Rustintervallen
Bekijk je resultaten van trainingen met ongedefinieerde rustintervallen? Houd dan rekening met het volgende:
- De totale tijd (rechtsboven) wordt weergegeven inclusief de rusttijden.
- In de samenvatting is de tijd de som van de krachtintervallen en dus exclusief rusttijden.
- R:55 262 geeft aan dat de roeier/skiër door is gegaan met roeien/skiën nadat de monitor de rust aan had gegeven. Hierdoor is er 262 meter afgelegd in de rusttijd.
- Bij het laatste interval kan een korte tijd worden weergegeven met nul meter. Dit is ingebouwd om een softwareprobleem te verhelpen en zorgt ervoor dat de waarde voor de Totale Tijd correct is.
CrossFit-Workout Voorbeelden
Hier vind je twee voorbeelden van CrossFit workouts. De eerste is een aangepaste Helen, de tweede is een roeiende Fran. Ze illustreren hoe je een variabele intervalworkout kunt instellen met ongedefinieerde rustintervallen.
Aangepaste Helen Workout
- Roei 1200 meter
- 63 Kettlebell Swings
- 36 pull-ups
- Roei 800 meter
- 42 Kettlebell swings
- 24 pull-ups
- Roei 400 meter
- 21 Kettlebell swings
- 12 pull-ups
De Monitor op Helen Instellen
- Kies in het Hoofdmenu Select Workout > New Workout > Intervals: Variable en stel de intervallen als volgt in:
- Interval 1: Kies Distance. Stel de waarde in op 1200 meter met ongedefinieerde rust.
- Interval 2: Kies Distance. Stel de waarde in op 800 meter met ongedefinieerde rust.
- Interval 3: Kies Distance. Stel de waarde in op 400 meter met ongedefinieerde rust.
- Kies No more intervals.
- Roei 1200 meter.
- Stop met roeien en doe de Kettlebells en pull-ups.
- Ga terug naar de roeimachine en druk op Continue.
- Roei 800 meter.
- Stop met roeien en doe de Kettlebells en pull-ups.
- Ga terug naar de roeimachine en druk op Continue.
- Roei 400 meter.
- Stop met roeien en doe de Kettlebells en pull-ups.
- Druk op Menu|Back en bekijk je resultaten
Roeiende Fran Workout
Doe vijf rondjes van de volgende lijst:
- 21 thrusters, 21 pull-ups, 200 meter roeien
- 18 thrusters, 18 pull-ups, 200 meter roeien
- 15 thrusters, 15 pull-ups, 200 meter roeien
- 12 thrusters, 12 pull-ups, 200 meter roeien
- 9 thrusters, 9 pull-ups, 200 meter roeien
De Monitor op Fran Instellen
- Kies in het Hoofdmenu Select Workout > New Workout > Intervals: Variable en stel de intervallen als volgt in:
- Interval 1: Kies Time. Stel de waarde in op 20 seconde met ongedefinieerde rust. Dit is nodig zodat de PM4 de tijd van je eerste interval kan meten waarin je de andere oefeningen doet.
- Interval 2: Kies Distance. Stel de waarde in op 200 meter met ongedefinieerde rust.
- Interval 3: Kies Distance. Stel de waarde in op 200 meter met ongedefinieerde rust.
- Interval 4: Kies Distance. Stel de waarde in op 200 meter met ongedefinieerde rust.
- Interval 5: Kies Distance. Stel de waarde in op 200 meter met ongedefinieerde rust.
- Interval 6: Kies Distance. Stel de waarde in op 200 meter met rusttijd 0:00. Dit zorgt ervoor dat de klok stopt zodra je de laatste 200 meter hebt geroeid.
- Zodra interval 7 in het scherm verschijnt kies No more intervals.
- Ben je klaar om te beginnen? Trek aan de hendel om de klok te starten.
- Doe 21 thrusters en 21 pull-ups.
- Druk op Continue en roei 200 meter.
- Doe 18 thrusters en 18 pull-ups.
- Druk op Continue en roei 200 meter.
- Doe 15 thrusters en 15 pull-ups.
- Druk op Continue en roei 200 meter.
- Doe 12 thrusters en 12 pull-ups.
- Druk op Continue en roei 200 meter.
- Doe 9 thrusters en 9 pull-ups.
- Druk op Continue en roei 200 meter. Na deze 200 meter stopt de klok en worden je resultaten opgeslagen.
Choose the ReRow/ReSki/ReRide option when you want to re-do a past workout. To use ReRow/ReSki/ReRide, you will need to have some workouts in the monitor’s memory. The ReRow/ReSki/ReRide function sets the speed of the pacer based on your previous performance.
Note: The ReRow/ReSki/ReRide feature only works for pieces with set distances, set times, set intervals, and so on; pieces done as a Just Row/Just Ski/Just Ride are not available for ReRow/ReSki/ReRide.
- On the Main Menu, choose Select Workout.
- Select ReRow/ReSki/ReRide.
- You will see a chronological list of past workouts. Use the up and down arrows to navigate the list.
- Navigate to the workout you want to rerow/reski. (Select the magnifier icon to view the workout details.)
- With the workout selected, choose ReRow/ReSki/ReRide.
Ergathlon allows you to connect up to three different ergs (RowErg, SkiErg, BikeErg) into one workout. As you transition from one erg to the next, the results are combined to give you your final time. Using three ergs with PM5 monitors, you can set up variations of four preprogrammed workouts.
You have two options for connecting the ergs together for each single Ergathlon:
- Use the wireless function on the PM5.
- Wire the ergs together with Ethernet cables.
We recommend wired Ergathlons if you have a PM5 with an entirely silver logo (a Version 1 PM5). If you want to run multiple Ergathlons in the same room, you must use wires to connect the monitors for each Ergathlon.
System Requirements
Ergathlon is only available for the PM5. See the table at the bottom to see which firmware version is required for your monitor. All machines in the Ergathlon will need to be running the correct firmware.
Ergathlon Set-Up
The order of machines on which you complete your Ergathlon is up to you, but you do need to follow the order in which you set them up. For example, if you set up Ergathlon on your SkiErg PM5 first, followed by the BikeErg PM5, then the RowErg PM5, you will need to complete each Ergathlon leg in that order.
You can complete an Ergathlon with just two machines, or you can row, ride, row, etc., if desired. You can also only use each machine once, so if you want to "row, ride, row," you'll need to use two different indoor rowers. If you wish to rank your Ergathlon in the Online Logbook, however, you need to use one erg of each type.
To set up an Ergathlon, from the Main Menu, choose Select Workout > New Workout > Special > Ergathlon > Create Ergathlon on the machine you want to start with.
Choose one of the following preprogrammed options:
- Super Sprint: 500m ski, 1000m bike, 500m row
- Sprint: 2000m ski, 4000m bike, 2000m row
- Middle Distance: 5000m ski, 10,000m bike, 5000m row
- Endurance: 10,000m ski, 20,000m bike, 10,000m row
Go to the next erg you want to use and on the monitor go to Select Workout > New Workout > Special > Ergathlon but this time choose Join Ergathlon.
If you have a third machine, repeat this last step. Once all the ergs are set up, go back to the first one, and press Start Ergathlon.
Recording Your Ergathlon
You can record your Ergathlon and upload it to the Online Logbook using either ErgData or via the Concept2 Utility. The Ergathlon will be saved on the first monitor you set up, so that is the monitor which must be connected to ErgData.
Firmware Compatibility
The table below shows the earliest compatible firmware version with Ergathlon. Go to the PM5 Firmware page for information on how to check your current version and update.
| Monitor | Firmware Version |
|---|---|
| Indoor Rower | |
| PM5v1 | 28 |
| PM5v2 | 165 |
| SkiErg | |
| PM5v1 | 728 |
| PM5v2 | 865 |
| BikeErg | |
| PM5 | 324 |
Biathlon combineert twee sporten: gewoonlijk langlaufen en schijfschieten. Races bestaan over het algemeen uit drie tot vijf rondes, met een schietronde tussen elke langlauf-ronde. Op elk gemist schot staat een penalty. Meestal bestaat die penalty eruit dat je 150 meter extra moet skiën.
Je kan de Biathlon Game gebruiken om te skiën of roeien met interval afgewisseld met schijfschieten of een andere activiteit. Je kan kiezen uit verschillende penalty-afstanden of helemaal geen penalty:
- Met penalty: penalty-afstanden worden berekend na elk schiet-interval en je moet ze afleggen voor de volgende interval begint.
- Zonder penalty: Er worden geen penalty-afstanden berekend. Je kunt tussen je intervallen tot maximaal 10 minuten rusten.
De computer houdt je tijd op de schietbaan bij en de totale tijd die verstrijkt. Penalty-rondes verschijnen op je geregistreerde training als een aparte interval zonder rust. Je kan het spel opnieuw skiën of roeien, maar de penalty-intervallen en je schiettijd zullen precies hetzelfde zijn als toen je de training in eerste instantie afrondde.
Voorafgaand aan het spel kies je het aantal intervallen (2 tot 15), de interval lengte en of je een penalty wil (kies een penalty van 0 tot 250 meter, in stappen van 50 meter) Doe je eerste interval. Wanneer je hem af hebt begint de rusttijd of de schiettijd en de PM zal je eraan herinneren om te stoppen met skiën of roeien. Als je gestopt bent zal het strafscherm verschijnen op de PM:
- Spelen met penalty: Nadat je je tijd op de schietbaan hebt afgerond druk je op de knop die overeenkomt met het aantal straffen dat je hebt opgelopen (0 tot 5). Als je aan het schieten was, kies je bijvoorbeeld het aantal gemiste schoten. De PM berekent je penalty-afstand (de gekozen penalty-vermeerdering vermenigvuldigd met het aantal gemiste penalty’s/schoten). Doe de penalty-ronde. Als je klaar bent begint je volgende interval.
- Spelen zonderpenalty: Druk gewoon op Doorgaan als je klaar bent om aan je nieuwe interval te beginnen.
Spellen en Racing
De Fish Game leert je je intensiteit te reguleren. Het doel van dit spel is om zoveel mogelijk punten te krijgen door de voedzame vis te eten. En ondertussen moet je de grote beesten met enorme tanden zien te ontwijken want die laten je score naar de zeebodem kelderen.
Op het scherm van de monitor ben jij de vis die andere oceaanbewoners ziet aankomen, zowel goede als niet zo goede. Verander je intensiteit om je vis omhoog en omlaag te bewegen langs de linkerkant van het scherm. Komt er een eetbare “goede” vis jouw kant op, probeer hem dan op te eten om punten te krijgen (kleine vissen zijn 30 punten waard; gestreepte vissen 60). Ontwijk de grote roofvissen, want die halen 45 punten van je score af als ze je te pakken krijgen.
Elk spel duurt vier minuten, met aan het eind de mogelijkheid om nog eens te spelen. De informatie van je Fish Game workout (tijd, afstand, tempo per 500 meter, et cetera) wordt opgeslagen op je LogCard of het geheugen van de monitor, net als bij een gewone training.
To set up a Fish Game, from the Main Menu select More Options > Games > Fish Game.
De Darts Game beloont consistentie in tempo en de kracht die je levert. Als je aan het leren bent hoe je een constante snelheid en haalfrequentie aanhoudt, of als je een nieuwe snelheid op een prettige manier wilt leren aanhouden, is de Darts Game een geweldig spel voor jou.
Bij elk spel krijg je 300 pijlen om naar het bord te “gooien”. Het doel is om zoveel mogelijk punten te verzamelen. Het aantal punten dat je krijgt hangt af van waar je dart terecht komt:
- Bull’s-Eye is 50 punten waard.
- De volgende drie ringen vanuit de roos zijn respectievelijk 25, 10 en 5 punten waard.
Aan het begin van elk spel word je gevraagd vijf halen te roeien. Dit stelt je snelheid en haalfrequentie voor de eerste paar pijlen in. Daarna zijn de snelheid en de haalfrequentie waar je naar streeft gebaseerd op je laatste halen. Als je je snelheid en haalfrequentie versnelt tijdens het spel, vliegt je pijl hoog over de schietschijf. Verlaag je je snelheid en haalfrequentie juist? Dan zal de pijl onder het bord door vliegen. Raak de roos door een constante snelheid en haalfrequentie aan te houden. Een perfecte score is 15.000 punten.
To set up a Darts Game, from the Main Menu select More Options > Games > Darts.
Target Training lijkt op Darts. Ook hier wil je zoveel mogelijk de Bull’s-Eyes raken door een constante snelheid en tempo aan te houden. Target Training verschilt van Darts doordat je je doelen voor snelheid en tempo kunt instellen. Target Training kan je op twee manieren spelen:
- Just Play: Een trainingssessie met een open einde waarbij je zolang roeit of skiët als je wilt. Net als bij het Darts spel, zal de streefsnelheid gebaseerd zijn op je laatste halen.
- Advanced: van tevoren stel je de constante snelheid en het tempo waarnaar je streeft vast.
- Coaches: Je kan de training voor je roeiers instellen en kijken wie de beste score haalt.
- Sporters: Je kan je favoriete “steady state” workout doen met de extra stimulans van het behalen van je beste score!
- Is gewichtsverlies je doel? Dan zouden lange, regelmatige trainingen in je schema moeten worden opgenomen – precies het soort trainingen dat dit spel stimuleert.
- Ben je aan het herstellen van een blessure? Dan kan dit spel het tempo aanhouden dat je fysiotherapeut heeft aangeraden.
Just Play: Aan het begin van elk spel word je gevraagd vijf halen te roeien. Hiermee worden je snelheid en haalfrequentie voor de eerste paar pijlen ingesteld; daarna zullen je streefsnelheid en haalfrequentie gebaseerd worden op je laatste halen. Als je je snelheid en haalfrequentie versnelt tijdens het spel, zal je pijl hoog over de schietschijf vliegen. Als je je snelheid en haalfrequentie juist verlaagt, zal de pijl onder het bord door vliegen. Raak de roos door een constante snelheid en haalfrequentie aan te houden.
Advanced: Dit is hetzelfde spel als Just Play, behalve dat je voor elk spel de duur, snelheid per 500 meter en haalfrequentie instelt. Voor de puntentelling begint word je gevraagd vijf halen te roeien. Hierdoor kan je in het juiste tempo komen en de goede snelheid bereiken, zoals je die van tevoren hebt ingesteld.
In beide versies van het spel hangt het aantal behaalde punten af van waar de pijlen terecht komen:
- Bull’s-Eye is 5 punten waard.
- De opeenvolgende ringen 3, 2 en 1 punt waard.
Je score wordt weergegeven als een percentage van de hoogst haalbare score. Een perfecte score is 100%.
To set up Target Training, from the Main Menu select More Options > Games > Target Training.
If you have a mix of PM3s, PM4s and PM5s, your option for running a race is to run a wired race with a PC and using USB cables as the means of wiring (network/Ethernet cables will not work).
Wired racing with a PC requires the use of a software package to manage the race. Concept2's ErgRace is available as a free download from our website.
With PM5s you have two options for conducting a race:
The type of race you run, and the method of connecting the machines you choose, depends on several factors, as listed in the chart below.
| No PC | With PC | ||
|---|---|---|---|
| Wired (RS485) | Wired (RS485) | Wired (USB) | |
| 1 erg | ● | ○ | ○ |
| 2–5 ergs | ● | ● | ● |
| 6–8 ergs | ● | ● | ● |
| 9+ ergs | ○ | ● | ● |
| Mix of PM3/PM4s/PM5s | ○ | ○ | ● |
| Using Venue Race Application | ○ | ● | ● |
| Using RowPro | ○ | ○ | ● |
| Monitoring heart rate with Garmin or Suunto | ● | ○ | ○ |
| Monitoring heart rate with Bluetooth Smart Polar H7 | ● | ○ | ○ |
| ○ Not compatible/not recommended ● Recommended/best option | |||
Wired, PC-Less Racing
Recommended applications:
- Racing between eight or fewer indoor rowers
- Impromptu races
- Informal settings where no audience display is required
- Racing without a PC or software
- Locations where more than one race is happening at a time, or where other wireless devices (WiFi, Bluetooth, etc.) are in use
- Races where ANT+, Garmin, Suunto or Bluetooth Smart heart rate equipment is in use
Additional equipment required:
- 14–15 foot (5 meters) or longer network or Ethernet cables with RJ45 plugs on the end
These are readily available from your local computer or office supply store, and are also available from Concept2. Do NOT get “crossover” cables as these will NOT work. (Crossover cables are used for direct computer to computer connections without a hub/switch in between and are usually specially marked) With a wired, PC-less race, options include:
- Arrange one bank of four indoor rowers facing another bank of four.
- Arranging the indoor rowers in a circle.
- Arranging the indoor rowers in one continuous line.
Pick the configuration that works best for the space and length of cables you have. Starting the Race Once the indoor rowers are configured, start the race as follows:
- On the PM5 Main Menu, select Games.
- On the Games Menu, select Racing.
- Designate one person as the race creator, and have the race creator select Create Race and then Select Race Length to set up the race.
- Once the race is created, participants can join the race by selecting Games > Racing > Join Race.
- When all participants are ready, the race creator selects Start Race.
Wired Racing with a PC
Recommended applications:
- Racing between nine or more indoor rowers
- Formal race settings, such as the CRASH-Bs
- Race settings where an audience display is required
- Locations where more than one race/heat is happening at a time
Wired racing with a PC requires using software to manage the race. You will also need a way to wire the indoor rowers to each other and to the race system. You can do this with either USB cables or with network/Ethernet cables. Concept2's ErgRace is available as a free download from our website.
USB Flash Drive
PM5s made prior to June 2024 were equipped with a USB-A port (sometimes referred to simply as a "USB port") for use with USB Flash Drives. This section applies only to these monitors.
For more information, see Which Ports Does My PM5 Have?
The PM5 works with USB flash drives (FAT and FAT32 USB formats only) to store your workout data and update your PM5 Firmware. Although using a USB flash drive is not required, it's a convenient way to store and manage workout data, and it allows you to perform firmware updates without needing to connect the PM5 to a computer. For best performance and reliability, use a name brand drive USB flash drive. Smaller USB flash drives will be more responsive, and we recommend not storing any other files on the disk. We also recommend not using USB 3.0 as they will drain battery life more without providing any speed benefits.
First Use: Initialize the USB Flash Drive
The first time you insert a USB flash drive into the back of the PM5, the PM5 creates a Concept2 folder on and adds pertinent subfolders and files to the USB flash drive. (Workouts, for instance, are stored in a Logbook subfolder of the Concept2 folder on the USB flash drive; firmware files are stored in the Firmware subfolder, and so on.) You will then be prompted to add a user name to the USB flash drive. This name identifies the owner of the USB flash drive (each USB flash drive stores information for a single user) and appears in the upper right corner of the PM5 screen. This process initializes the USB flash drive for everyday use with the PM5.
Note: You can also initialize a USB flash drive with the Concept2 Utility Version 7 or higher. Learn more
Everyday Use/Logging Workout Data to the USB Flash Drive
- Insert the USB flash drive into the back of the PM5.
- Turn the PM5 on to the Main Menu and wait until the PM5 recognizes your USB flash drive. The PM5 must recognize your USB flash drive before you begin each workout. Please note:
- Recognition will only occur while the Main Menu is showing.
- Recognition may take five seconds or more.
- Recognition has occurred when the PM5 displays the Welcome screen showing your user name in the upper right corner of the screen.
- If the PM5 is off, press Menu to power it up and then wait for recognition.
- Your workout must be "ended" prior to removing the USB flash drive for the data to be saved in the USB Logbook. A defined workout will "end" upon completion. A "Just Row", interval, or uncompleted workout must be ended by pressing the Menu button. Workout data will be logged properly when the Main Menu screen appears. A "Just Row" workout less than one minute in length will not be logged.
Notes:
- When the USB flash drive is in use, the fourth option on the PM5 Main Menu becomes "USB Logbook;" otherwise, this option is labeled "Memory," and any workout completed will be stored to the PM Memory instead of to the USB flash drive.
- To see information and workouts that have been saved to the USB flash drive, select USB Logbook from the PM5 Main Menu, and select a menu option as appropriate.
- While you can use the USB flash drive for storing other information, we do not recommend storing that data in or making any changes to the Concept2 folder or its contents.
- Do not attempt to charge a mobile device using the USB flash drive port on the PM5 as this will overload the port. Attaching anything other than a USB flash drive to the PM5 is neither recommended nor supported.
- The PM5 works with any quality USB Flash Drive that is formatted with FAT or FAT32. Please be aware, however, that some larger USB Flash Drives may be pre-formatted with incompatible file systems, so we recommend smaller size USB Flash Drives for use with the PM5.
After you complete a workout, the PM5 saves it to the USB flash drive, if the USB flash drive is present; otherwise, the PM5 saves the workout to memory. The PM5 can store over 1000 workouts in memory.
To transfer a workout from memory to the USB flash drive:
- Insert an initialized USB flash drive in the PM5 and press Menu to power up the monitor.
- When the Welcome screen is displayed, select USB Logbook.
- Select Logbook Utilities.
- Select Move Workout.
- From the list displayed, select the workout you would like to move.
- Select Move to USB Log.
- Insert an initialized USB flash drive in the PM5 and press Menu to power up the monitor.
- When the Welcome screen is displayed, select USB Logbook.
- Select Logbook Utilities.
- Select Delete Workout.
- Select the workout you want to delete.
- Select Delete.
To view workout results on a USB flash drive:
- Insert an initialized USB flash drive in the PM5 and press Menu to power up the monitor.
- When the Welcome screen is displayed, select USB Logbook.
- Select List by Date or List by Type, according to your preference. If you choose List by Type, then choose the workout type for which you want to view results (Single Distance, Single Time, and so on).
- Use the arrow selections to navigate to the workout results you want to view.
- Select the magnifier icon to view the results.
Each USB flash drive holds information for one user.
Adding a User
The first time you insert a USB flash drive in a Performance Monitor, the monitor creates the necessary folders and files on the USB flash drive and then prompts you to add a user:
- Choose plus or minus to scroll through the alphabet as needed, then use the right arrow to navigate to the next space.
- Select the checkmark icon to save the new user.
Editing a User
Once a user has been added to a USB flash drive, you can edit that user's lifetime meters or user name as follows.
- Insert a USB flash drive in the PM5 and press Menu to power up the monitor.
- Wait until the PM5 displays the Welcome screen and shows your USB flash drive user name in the upper right corner of the screen.
- On the Welcome screen, select USB Logbook.
- Select Logbook Utilities.
- Select Edit User.
- Edit information as necessary:
- Choose plus or minus to increase/decrease the values and scroll through the alphabet as needed.
- Choose the right arrow to navigate to the next digit/space.
- Select the checkmark icon to save the changes.
The USB flash drive stores a lifetime meters value for the user on the USB flash drive. If you previously kept a paper log of your workouts, or if you completed workouts without your USB flash drive in the PM5, you may want to update your lifetime meter value to include those meters. With an initialized USB flash drive inserted in the PM5, take the following steps:
- From the Main Menu, select USB Logbook.
- Select Logbook Utilities.
- Select Edit User.
- Update the lifetime meters displayed by using the arrow selections to navigate through the digits, and the plus and minus selections to increase/decrease the values.
- Select the checkmark icon to save the changes.
Saving a workout as a favorite requires a USB flash drive, because the favorites are actually saved to these devices. When using a USB flash drive, the monitor will prompt you to save a workout as a favorite anytime you set up a new workout (predefined or custom workouts cannot be saved as favorites.) Select Yes when prompted, and then select which Favorite you want to replace. (Until you begin saving your own favorites, the Favorites list on the monitor will match the Custom list.)
Each USB flash drive holds five favorites. You can also copy favorites to the Custom List, and then set up five new favorites for a total of 10 personalized workouts.
The USB flash drive stores up to five favorite workouts for the user on the USB flash drive. Using the Copy Favorites function to copy those favorites to the Custom List allows you to then set up five new favorite workouts for a total of 10 personalized workouts on the USB flash drive.
- Insert an initialized USB flash drive in the PM5 and press Menu to power up the monitor.
- When the Welcome screen is displayed, select USB Logbook.
- Select Logbook Utilities.
- Select Edit Custom List.
- Select the favorites to copy:
- Select Copy All to copy all of the favorite workouts to the Custom List (this will overwrite the entire Custom List).
- Select Copy One to copy a select workout to the Custom List. You will then need to select the Favorite workout to copy, and the Custom workout to replace.
To do one of these workouts in the future, you would select it from the Custom List. See Selecting a Preset Workout for more information.
Choose the ReRow/ReSki/ReRide option when you want to re-do a past workout. To use ReRow/ReSki/ReRide, you will need a USB flash drive that contains past workouts. The ReRow/ReSki/ReRide function sets the speed of the pacer based on your previous performance. Note: The ReRow/ReSki/ReRide feature only works for pieces with set distances, set times, set intervals, and so on; pieces done as a Just Row/Just Ski/Just Ride are not available for ReRow/ReSki/ReRide.
- Plug the USB flash drive containing past workouts into the PM5.
- On the Main Menu, choose Select Workout.
- Select ReRow/ReSki/ReRide.
- Select the type of workout you would like to row or ski against (Single Distance, Intervals: Time, and so on). You will see a list of past workouts that match the type of workout you selected (for example, if you selected "Single Distances" you might see 10000m, 5000m, and so on, listed on the display).
- Use the up and down arrows to navigate the list.
- Select List Workouts to see all the workouts in that category.
- Navigate to the workout you want to rerow/reski. (Select the magnifier icon to view the workout details.)
- With the workout selected, choose ReRow/ReSki/ReRide.
This will erase all folders on the drive.
- Windows—Format to FAT or FAT32 (not exFAT or NTFS)
- Insert the flash drive into your computer.
- Open This PC or Computer (depending on OS version).
- Right-click on the flash drive device.
- Click Format.
- Select File System and click FAT or FAT32.
- Click Start.
- Click OK and eject the drive
- Mac—Format to MS-DOS (FAT)
- Insert the flash drive into your computer.
- Run Disk Utility (Finder > Applications > Utilities > Disk Utility).
- Under View Options, select Show All Devices. The flash drive will be visible in the left column.
- Select the flash drive device.
- Select Erase at the top of the application window.
- Name the flash drive.
- Select MS-DOS (FAT) format.
- Select Master Boot Record scheme.
- Click Erase. Disk Utility will complete the formatting.
- Click Done then eject the flash drive.